Installing your watchband

1. Remove the old watchband spring bar by using a spring bar tool or another tool with a narrow edge to gently depress it at the end and remove it from the watch case lug hole where the watchband is connected to the case, see illustration at right.
2. Put new spring bars into new watchband.
3. Insert one end of the spring bar into the watch case lug hole and while depressing it, position the opposite end of the spring bar into the other case hole.
4. Move the new watchband gently side to side until the other end of the spring bar drops into places in the other watch case lug hole.
5. Be careful as to not scratch watch case or new watchband.